Schneider SIDE MOUNT AUX. NO/NC GVAN11

Auxiliary contacts are mainly used to signal switching or malfunction states, for interlocking circuits or logic and sequence controls with low to high loading. Many protection or control devices have additional auxiliary contacts.The auxiliary contact is often used in a relay logic circuit, or for some other part of the motor control scheme, typically switching 120 Volt AC power instead of the motor voltage. One contactor may have several auxiliary contacts, either normally-open or normally-closed if required.

Complementary

[Ui] rated insulation voltage                 600 V conforming to UL 508

                                                             690 V conforming to IEC 60947-1

                                                              600 V conforming to CSA C22.2 No 14

[Ue] rated operational voltage              48…690 V AC

                                                             24…240 V DC

[Ith] conventional free air thermal current               6 A

protection type                                    GB2CB… circuit breaker

                                                            GG fuse 10 A

 mechanical durability                          100000 cycles

minimum switching current                  5 mA

minimum switching voltage                  17 V

rated operational power in VA:

300 VA at 48 V AC-15 – electrical durability: 100000 cycles

414 VA at 690 V AC-15 – electrical durability: 100000 cycles