Schneider MODULAR CONTACTOR 25A 2NO 220 250V GC2520M5
range : TeSys
product name : TeSys GC
product or component type : Modular contactor
device short name : GC25
contactor application
Motor control
Heating
Lighting
tilisation category :
AC-7B
AC-7A
poles deion : 2P
power pole contact composition : 2 NO
[Ue] rated operational voltage : <= 250 V AC
[Ie] rated operational current :
25 A AC-7A
8.5 A AC-7B
operating position
30°/vertical
control circuit type
AC at 50 Hz
[Uc] control circuit voltage
220…240 V AC 50 Hz
[Uimp] rated impulse withstand voltage
4 kV
[Ith] conventional free air thermal current
25 A (at 50 °C) for power circuit
Irms rated making capacity
68 A at 400 V AC for power circuit conforming to IEC 61095
rated breaking capacity
68 A at 400 V for power circuit conforming to IEC 61095
[Icw] rated short-time withstand current
200 A 40 °C – 10 s for power circuit
62 A 40 °C – 30 s for power circuit
associated fuse rating
25 A gL at <= 440 V for power circuit
average impedance
2.5 mOhm – Ith 25 A 50 Hz for power circuit
[Ui] rated insulation voltage
500 V conforming to IEC 61095
500 V conforming to VDE 0110
electrical durability
AC-7A: 100000 cycles
AC-7B: 100000 cycles
power dissipation per pole
1.6 W
control type
Remote control
mounting mode
Clip-on
mounting support
DIN rail
standards
IEC 61095
IEC 60947-5
connections – terminals
Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 2.5 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1.5 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²solid without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 6 mm²solid without cable end
Power circuit: screw clamp terminals 2 cable(s) 4 mm²solid without cable end
tightening torque
Control circuit: 0.8 N.m – on screw clamp terminals
Power circuit: 0.8 N.m – on screw clamp terminals
operating time
10…25 ms opening
10…30 ms closing
mechanical durability
1000000 cycles
maximum operating rate
300 cyc/h 50 °C
control circuit voltage limits
Drop-out: 0.2…0.75 Uc at 50 Hz (at <50 °C)
Operational: 0.85…1.1 Uc at 50 Hz (at <50 °C)
inrush power in VA
15 VA 50 Hz (at 20 °C)
hold-in power consumption in VA
3.8 VA 50 Hz (at 20 °C)
heat dissipation
1.3 W at 50/60 Hz
Environment
IP degree of protection
IP40 conforming to VDE 0106 (in enclosure)
IP20 conforming to VDE 0106
protective treatment
TC
ambient air temperature for operation
-5…50 °C
ambient air temperature for storage
-40…70 °C
operating altitude
<= 3000 m
mechanical robustness
Shocks contactor open: 10 Gn for 11 ms
Shocks contactor closed: 15 Gn for 11 ms
Vibrations contactor open: 2 Gn, 5…300 Hz
Vibrations contactor closed: 3 Gn, 5…300 Hz
total number of 18 mm modules
1
height
81 mm
width
17.5 mm
depth
62.5 mm
net weight
0.11 kg
colour
White
Mention 800buildingmaterials when calling supplier to get a BEST DEALS