ATLAS-MPI TEE 0.75″ HP ATLAS T0.75
UPVC 90 degree tees are designed to link three pieces of UPVC pipe together at right angles to each other.
The flow characteristics of a PVC Tee are different depending which branch of the tee the fluid is entering and leaving.
If going straight through, the friction loss is quite low (slightly more than a straight piece of pipe) but when the fluid is passing through 90 degrees (in or out the branch), friction loss is much greater than that.
The plain 90 degree tee has solvent cement sockets at either end. The PVC 90 degree tees have a pressure rating of greater than 10bar and are fully WRAS approved for use with drinking water.
Atlas Tee HP PVC is made of High UPVC material and it is approved as per WRAS.
Fittings: Inch Series ½” to 8” Class E (PN15) to BS EN 1452-3, solvent cement and BSP threaded
Fittings: Metric Series 20mm to 200mm PN16 to DIN 8061-8062, solvent cement and BSP threaded
Brands: “ATLAS”
Quality Mark: BSI Kitemark as per BS EN 1452-2 & BS EN 1452-3
uPVC High Pressure Fittings as per WRAS approval
Colour: Dark Grey
Mention 800buildingmaterials when calling supplier to get a BEST DEALS