7E Trading 20 Pcs ABEC-5 608RS 608ZZ Carbon Steel Both Sides Shielded Skateboard Ball Bearings Set

• Red 608ZZ bearing, suitable for roller skates, children’s scooters, stunt scooters, skateboards, outdoor products & other pulley products.
• Chrome-covered chrome steel, hard, smooth, long life, durable.
• Standard 608 Size, Easy Installation & Replacement.
• Package Content : 20x BALL WHEELS.

•  Radial ball bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. Radial Deep Groove Ball Bearings are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.

  Common Options of Radial Deep Groove Ball Bearings:

  • ZZ– Two Metal Shields
  • 2RS– Two Rubber Seals
  • NR– Snap Ring
  • M– Brass Cage
  • C0– Normal Internal Clearance
  • C3– Greater than normal

  Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

  Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

  Bearing Data – General
  RSH or RS = Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the bearing
  2RSH or 2RS = RSH or RS contact seal on both sides of the bearing

  RSL = Sheet steel reinforced low-friction contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the bearing
  2RSL = RSL low friction contact seal on both sides of the bearing

  Z = Shield of pressed sheet steel on one side of the bearing
  2Z or ZZ = Z-Shield on both sides of the bearing