HIOKI MULTIMETER ANALOG 3030-10F

MULTIMETER ANALOG GEN PURPOSE                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   Analog meters can measure voltage and current by using power from the test circuit, but require a supplementary internal voltage source for resistance testing, while electronic meters always require an internal power supply to run their internal circuitry.

 Brand: Hioki

Model Number: 3030-10

Type: Electrical Testing

Analog Multimeter

DC Voltage: 0 to 600V

AC Voltage: 0 to 600V

DC Current: 0 to 300mA Analog multimeter measures voltage, resistance, and current

Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform

Battery tester feature determines amount of charge in 1.5V batteries

Measures temperature with a thermistor probe (sold separately)

The Hioki 3030-10 HiTester analog multimeter is an average-sensing, manual-ranging meter for measuring voltage, resistance, and current in electrical testing applications. The meter comes with a set of detachable test leads. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The battery tester feature determines the amount of charge remaining in 1.5V batteries. A thermistor probe (sold separately) can be connected to the meter to take temperature measurements. The meter can also test the functionality of LED lights. A 0.5-amp/250V fuse is installed to help protect the operator from electric shock due to transient voltage. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building’s AC power supply). The meter can survive falls of up to 1 meter to a hardwood or concrete floor. It comes with a carrying case for transport and storage.