The actuator is connected with a standard modulating signal of DC 0/2 … 10V and travels to the position defined by the positioning signal. The measuring voltage U serves for the electrical display of the actuator position 0 … 100% and as slave control signal for other actuators.
Actuating force 500 N, stroke 15 mm, mechanical position indication, actuating time 150 s, IP 54. This actuator has been designed for application in stationary heating, ventilation and air-conditioning systems and is not allowed to be used outside the specified field of application, especially in aircraft or in any other airborne means of transport. – Only authorized specialists may carry out installation. All applicable legal or institutional installation regulations must be complied with during installation. – The switch for changing the direction of motion/the closing point may be adjusted only by authorized personnel. The direction of stroke is critical, particularly in connection with frost protection circuits. – The device may only be opened at the factory by the manufacturer. It does not contain any parts that can be replaced or repaired by the user. – The device contains electrical and electronic components and is not allowed to be disposed of as household refuse. Local legislations must be obeyed when disposing the components. – For installation the local and international standards and regulations have to be followed.
Mention 800buildingmaterials when calling supplier to get a BEST DEALS